Manual Page for Command >> ENTHALPY


Syntax
>> ENTHALPY (phase_name/PHASE: iphase) (CHANGE/DELTA)

Parent Command
> OBSERVATION

Subcommand
>>> SINK

Description
This command selects as an observation type the flowing enthalpy in a production well. This observation type refers to a sink code name. If multiple elements are provided, the flowing enthalpy is weighted by the individual production rates. If a phase is selected either by specifying a valid phase_name or a phase number iphase or through command >>>> PHASE, only the flowing enthalpy of that phase is calculated. Note that the enthalpy of the injected fluid can also be an unknown parameter to be estimated (see command >> ENTHALPY (p)).

Example
> OBSERVATION
>> ENTHALPY
>>> SINK: WEL_1 + 5
>>>> ANNOTATION : Flowing enthalpy
>>>> FACTOR : 1000.0 [kJ/kg] - [J/kg]
>>>> DATA from FILE: enthalpy.dat [HOUR]
>>>> DEVIATION : 10.0 [kJ/kg]
<<<<
<<<
<<
<

See Also
>> ENTHALPY (p)


Back to Command Index

Page updated: June 20, 2013