Command >>>> GUESS
Manual Page for Command >>>> GUESS
>>>> GUESS: guess
all third-level commands in block > PARAMETER
This command provides an initial guess of the parameter to be estimated.
If neither this command nor command >> GUESS is used, the initial guess
is taken from the TOUGH2 input file.
The initial guess is the starting point for the minimization algorithm,
to be distinguished from prior information (see command >>>> PRIOR).
The initial guess can be overwritten by the second-level command >> GUESS.
If command >>>> LOGARITHM is present, the initial guess is the logarithm
of the parameter. Similarly, if command >>>> FACTOR is present,
the initial guess should be a multiplication factor (default is 1.0).
>> ABSOLUTE permeability
>>> ROCK types: CLAY1 CLAY2 CLAY3 BOUND
>>>> initial GUESS : 1.0
>>>> is not WEIGHTed : 0.0 (default)
>>> ROCK type : SAND1
>>>> PRIOR information : -12.0
>>>> standard DEVIATION: 1.0 order of magnitude
>> GUESS, i.e., starting point for optimization
>> GUESS |
>>>> PRIOR |
>>>> DEVIATION (p) |
Back to Command Index
Page updated: July 29, 1997