Manual Page for Command >>>> IMMOBILIZATION


Syntax
>>>> IMMOBILIZATION (: ofredmin)

Parent Command
>>> SELECT

Subcommand
-

Description
Employs "Temporary Parameter Immobilization" [Skahill and Doherty, J. Hydrol., 329, 122-139, 2006] (also referred to as "Automatic User Intervention") if the Levenberg-Marquardt algorithm is used. Insensitive parameters are fixed if the reduction in the objective function is less than ofredmin (default = 10%). If ofredmin is negative, insensitive parameters are fixed if the objective function is increased by less than -ofredmin; however, any trial parameter set that reduces the objective function is accepted.

Example
> COMPUTATION
>> OPTION
>>> SELECT parameter
>>>> IMMOBILIZE parameter if objective function is reduced by less than : 20 %
<<<<
<<<
<<

See Also
>>>> CORRELATION | >>>> SENSITIVITY


Back to Command Index

Page updated: April 25, 2014