Manual Page for Command >>> MODEL


Syntax
>>> MODEL
or
>>> NONE

Parent Command
all second-level commands in block > PARAMETER or > OBSERVATION addressing parameters or observations that refer to the entire model domain or a non-specific item.

Subcommand
all fourth-level commands in block > PARAMETER or > OBSERVATION, respectively.

Description
Most parameters refer to a rock type or code name of a sink or source. Some parameters, however, are general or associated with the entire model domain. Similarly, while most observations refer to an element, connection, or sink/source, there are observation types that are not associated with a well-defined point in space. The commands >>> MODEL or >>> NONE are dummy commands, i.e. place holders on the third command level for parameter and observation types not further specified by one of the other third-level commands.

Example
> PARAMETER
>> SELEC parameter
>>> NONE
>>>> ANNOTATION: Gel Density (EOS11)
>>>> INDEX : 2
>>>> VALUE
<<<<
<<<
<<

> OBSERVATION
>> TOTAL MASS of PHASE: 2
>>> refers to entire MODEL
>>>> ANNOTATION : Mass of liquid
>>>> DATA on FILE : liquid.dat
>>>> DEVIATION : 0.01 [kg]
<<<
<<

See Also
>>> ELEMENT | >>> CONNECTION | >>> DEFAULT | >>> MATERIAL | >>> SET (p) | >>> SOURCE


Back to Command Index

Page updated: July 29, 1997