Manual Page for Command >>>> PICK


Syntax
>>>> PICK: npick

Parent Command
all third-level commands in block > OBSERVATION

Subcommand
-

Description
This command identifies the number of data points being skipped when reading from a long data file. Only every npick data point is read. The default is npick=1, i.e., every data point is accepted.

Example
> OBSERVATION
>> TEMPERATURE
>>> ELEMENTS: ELM_10 + 4
>>>> SKIP: 3 lines before reading data
>>>> PICK only every : 10 data point
>>>> DATA on file: temp.log
>>>> standard DEVIATION: 0.5 degrees C
<<<<
<<<
<<

See Also
>>>> COLUMN | >>>> DATA | >>>> FORMAT | >>>> SET (o) | >>>> SKIP


Back to Command Index

Page updated: July 29, 1997